Real Brick Cladding Systems

Cladmate and Terra building materials have cleverly combined extensive cladding knowledge with decades of brick experience, to create a real brick cladding system.CWCT certified CMS40 MF Slip mechanically fixed brick cladding system is a revolutionary facade system that fuses traditional brickwork facades, to the latest advanced rain screen cladding systems. The result is an innovate A1 Fire Rated rainscreen cladding system that is both cost effective and suitable for high rise buildings.

brick cladding systems uk


MF Slip provides lightweight brick cladding which can be used on most substrates. CMS40 MF Brick Slip system is suitable for new build, existing structures, internal and external use.


Suitable For

  • Masonry Wall (Brick or dense block)
  • Modular Units
  • Timber Frame
  • Steel Frame
  • Concrete Frame
  • SFS
  • Internal and External
brick cladding panels uk

Brick Slip 

Brick Slip Cladding


corner brackets



Brick Slip 






System Overview


Support System

MF Slip is made of non-combustible class A1 rated aluminium.The support system consist of anodized horizontal and vertical rails (T angle rails), fortis helping hand brackets with thermal isolator and main anchor fixed back to your structure. Stainless steel option available…


The Fixing Brick Slips system is supplied by CLADMATE. All the fixings must be S4 stainless steel. The fixing system consists of aluminum support brackets, thermal isolator pads, and bracket/wall screws.


Vertical Brick Spacer

Brick slips spacers are 86mm length stainless/aluminium cross clips that are inserted between bricks to generate 10mm vertical mortar joint.


Pointing Mortar

CMS40 MF Slip system uses Terrabond T-Point pointing mortar which has excellent adhesion, sealing and movement accommodation properties.

Cladding Rail System weight is app. 4.48kg/m².TERRABOND T-Point Pointing mortar weight app. 5kg/m². System weight approximately 51.5kg/m². The average thermal conductivity (K Value) for clay brick slips is 0.71W/mK.

System Components

Stock CodeDescription
RS-HSR-3000Horizontal Support Rails 3000mm
RS-HSR-6000 Horizontal Support Rails 6000mm
RS-HSER-3000 Horizontal Starter End Bar 3000mm
RS-HSER-6000 Horizontal Starter End Bar 6000mm
RS-HSB-3000 Horizontal Starter Bar 3000mm
RS-HSB-6000 Horizontal Starter Bar 6000mm
RS-VPC-15 Vertical Pointing Plug
CMF-SB-UN 60-220mm Fortis Vertical Bracket Single 11&6.5mm Hole
60-220mm Fortis Vertical Bracket Single 11&6.5mm Hole
CMF-DB-11 60-220mm Fortis Vertical Bracket Double 11mm Hole
Horizontal Bottom Rails Aluminium
Horizontal Bottom Rails Aluminium
Horizontal Support Rails Aluminium
Horizontal Support Rails Aluminium

Horizontal Top Rails Aluminium
Horizontal Top
Rails Aluminium
Brick Spacer
Brick Spacer


Our experienced team are happy to help you with your project. We arecommitted to assisting you from design to installation. Our components not only support the CMS40 system but a variety of alternative cladding applications. We guarantee to provide suitable support components to a variety of cladding system applications, no matter the complexity of design.


Our Technical team are hands on and ready to assist you from start to finish. All installation must be according to CLADMATE design and specifications.

Step 1 – Design and Setting out

Our dedicated technical team will assist your project and provide the specification. Generic detail drawings are provided in PDF and AutoCAD forms.

Application of Breather Membrane

Step 2 – Application of Breather Membrane

Breather Membrane should be applied to the substrate surface, as per manufactures recommendations.

Bracket Support

Step 3 – Bracket Support

Place each of the Aluminium Fortis support brackets with their thermal isolator in their specified location. Securely fix the Aluminium support brackets to the substrate, using the specified primary fixing.

Step 7 – Applying Pointing Mortar

Step 4 – Installation of Vertical Rail

Vertical rails to be secured between support brackets using self drill screw. Centres dependant on design. Install Terrawool Rainclad insulation between the rails.


Step 5 – Horizontal Rails

Horizontal rails are to be installed at internals depending on the design and secured using provided fixings back to vertical rails.


Step 6 – Brick Slip Installation

Separate each brick using the provided brick spacers to create a vertical joint and act as the backing for the mortar. Slot brick slips into place, guided by horizontal rails.

Bracket Support

Step 7 – Applying Pointing Mortar

Apply Terrabond T-Point pointing mortar using pointing gun,
between all 10mm joints.

After Installation


The CLADMATE CMS40 MF Slip system requires little or no maintenance. Check mortar pointing at 5year intervals as part of a maintenance review. Refer to CLADMATE technical team for guidance on specific topics if required..


In the unlikely event of damaged or broken brick slips, they can be easily replaced by carefully removing mortar pointing around the slip lifting it upwards to free the bottom from the support rail, and sliding it out base first. Damage to the horizontal supporting rails may require the removal of a section of slips to remediate. Unbroken brick slips may be able to be reused.


MF Slip support system utilises Aluminium as its primary component and as such is fully recycable. Bricks used in conjuction with CMS40 MF Slip systems can be used in a multitude of ways when recycled. Aluminium and Bricks are widely recycable throughout the world and meet with many current building sustainability targets.


MF Slip Brick Slip Cladding System


Fortis Vertical Single BracketsSize6.5mm Steel-Timber Frame11mm For Concrete Block

Fortis Vertical Double BracketsSize6.5mm Steel-Timber Frame11mm For Concrete Block

Corner Bracket HolderSizeStock CodeDescription
Corner-Bracket-Holder3000CMB48-48-3000Corner Bracket Support x 3000
Corner-Bracket-Holder6000CMB48-48-6000Corner Bracket Support x 6000

L ProfileStock CodeDescription
aluminium l profileLP50-50-2.2-3000L Profile 50 x 50 x 2.2 x 3000 (different sizes available )
aluminium l profileLP50-50-2.2-6000L Profile 50 x 50 x 2.2 x 6000 (different sizes available )
aluminium l profileLP 60-40-2.2-3000L Profile60 x 40 x 2.2 x 3000 (different sizes available )
aluminium l profileLP60-40-2.2-6000L Profile60 x 40 x 2.2 x 6000 (different sizes available )
aluminium l profileLP 60-40-2.5-3000L Profile60 x 40 x 2.5 x 3000 (different sizes available )
aluminium l profileLP60-40-2.5-6000L Profile60 x 40 x 2.5 x 6000 (different sizes available )

T ProfileStock CodeDescription
TP 60-80- 2.2-3000T Profile 60x80 x 2.2 x 3000
TP 60-80- 2.2-6000T Profile 60x80 x 2.2 x 6000
TP 60-100- 2.2-3000T Profile 60x100 x 2.2 x 3000
TP 60-100- 2.2-6000T Profile 60x100 x 2.2 x 6000
TP 60-120- 2.2-3000T Profile 60x120 x 2.2 x 3000
TP 60-120- 2.2-6000T Profile 60x120 x 2.2 x 6000
TP 60-140- 2.2-3000T Profile 60x140 x 2.2 x 3000
TP 60-140- 2.2-6000T Profile 60x140 x 2.2 x 6000

Omega Profile Stock CodeDescription
omega-profile - cladmateCMOM-25-120-2.4-300025mm Omega Profile 25 x 120 x 2.4 x 3000
omega-profile - cladmateCMOM-25-120-2.4-600025mm Omega Profile 25 x 120 x 2.4 x 6000
omega-profile - cladmateCMOM-40-120-2.4-300040mm Omega Profile 40 x 120 x 2.4 x 3000
omega-profile - cladmateCMOM-40-120-2.4-600040mm Omega Profile 40 x 120 x 2.4 x 6000

Z ProfileStock CodeDescription
aluminium z profileCMZP25-45-30-2.4-300025mm Z Profile 45 x 25 x 30 x 2.4 x 3000
aluminium z profileCMZP25-45-30-2.4-600025mm Z Profile 45 x 25 x 30 x 2.4 x 6000
aluminium z profileCMZP40-55-30-2.4-300040mm Z Profile 55 x 40 x 30 x 2.4 x 3000
aluminium z profileCMZP40-55-30-2.4-600040mm Z Profile 55 x 40 x 30 x 2.4 x 6000

Corner ProfileStock CodeDescription
Corner-Profile - CladmateCMKP48-48-3000Corner Rail x 3000
Corner-Profile - CladmateCMKP48-48-6000Corner Rail x 6000

Let’s get specific!

We offer bespoke static calculations, m² rates, U-Values and more, for your project.